Contribution of residential wood combustion to hourly winter aerosol in Northern Sweden determined by positive matrix factorization

International audienceThe combined effect of residential wood combustion (RWC) emissions with stable atmospheric conditions, which is a frequent occurrence in Northern Sweden during wintertime, can deteriorate the air quality even in small towns. To estimate the contribution of RWC to the total atmospheric aerosol loading, the positive matrix factorization (PMF) method was applied to hourly mean particle number size distributions measured in a residential area in Lycksele during winter 2005/2006. The sources were identified based on the particle number size distribution profiles of the PMF factors, the diurnal contributions patterns estimated by PMF for both weekends and weekdays, and correlation of the modeled particle number concentration per factor with measured aerosol mass concentrations (PM10, PM1, and light-absorbing carbon MLAC). Through these analyses, the factors were identified as local traffic (factor 1), local RWC (factor 2), and local RWC plus long-range transport (LRT) of aerosols (factor 3). In some occasions, it was difficult to detach the contributions of local RWC from background concentrations since their particle number size distributions partially overlapped and the model was not able to separate these two sources. As a consequence, we report the contribution of RWC as a range of values, being the minimum determined by factor 2 and the possible maximum as the contributions of both factors 2 and 3. A multiple linear regression (MLR) of observed PM10, PM1, total particle number, and MLAC concentrations is carried out to determine the source contribution to these aerosol variables. The results reveal RWC is an important source of atmospheric particles in the size range 25?606 nm (44?57%), PM10 (36?82%), PM1 (31?83%), and MLAC (40?76%) mass concentrations in the winter season. The contribution from RWC is especially large on weekends between 18:00 LT and midnight whereas local traffic emissions show similar contributions every day

Effects of relative humidity on aerosol light scattering in the Arctic

Aerosol particles experience hygroscopic growth in the ambient atmosphere. Their optical properties – especially the aerosol light scattering – are therefore strongly dependent on the ambient relative humidity (RH). In-situ light scattering measurements of long-term observations are usually performed under dry conditions (RH>30–40%). The knowledge of this RH effect is of eminent importance for climate forcing calculations or for the comparison of remote sensing with in-situ measurements. This study combines measurements and model calculations to describe the RH effect on aerosol light scattering for the first time for aerosol particles present in summer and fall in the high Arctic. For this purpose, a field campaign was carried out from July to October 2008 at the Zeppelin station in Ny-Ålesund, Svalbard. The aerosol light scattering coefficient σ<sub>sp</sub>(λ) was measured at three distinct wavelengths (λ=450, 550, and 700 nm) at dry and at various, predefined RH conditions between 20% and 95% with a recently developed humidified nephelometer (WetNeph) and with a second nephelometer measuring at dry conditions with an average RH<10% (DryNeph). In addition, the aerosol size distribution and the aerosol absorption coefficient were measured. The scattering enhancement factor <i>f</i>(RH, λ) is the key parameter to describe the RH effect on σ<sub>sp</sub>(λ) and is defined as the RH dependent σ<sub>sp</sub>(RH, λ) divided by the corresponding dry σ<sub>sp</sub>(RH<sub>dry</sub>, λ). During our campaign the average <i>f</i>(RH=85%, λ=550 nm) was 3.24±0.63 (mean ± standard deviation), and no clear wavelength dependence of <i>f</i>(RH, λ) was observed. This means that the ambient scattering coefficients at RH=85% were on average about three times higher than the dry measured in-situ scattering coefficients. The RH dependency of the recorded <i>f</i>(RH, λ) can be well described by an empirical one-parameter equation. We used a simplified method to retrieve an apparent hygroscopic growth factor <i>g</i>(RH), defined as the aerosol particle diameter at a certain RH divided by the dry diameter, using the WetNeph, the DryNeph, the aerosol size distribution measurements and Mie theory. With this approach we found, on average, <i>g</i>(RH=85%) values to be 1.61±0.12 (mean±standard deviation). No clear seasonal shift of <i>f</i>(RH, λ) was observed during the 3-month period, while aerosol properties (size and chemical composition) clearly changed with time. While the beginning of the campaign was mainly characterized by smaller and less hygroscopic particles, the end was dominated by larger and more hygroscopic particles. This suggests that compensating effects of hygroscopicity and size determined the temporal stability of <i>f</i>(RH, λ). During sea salt influenced periods, distinct deliquescence transitions were observed. At the end we present a method on how to transfer the dry in-situ measured aerosol scattering coefficients to ambient values for the aerosol measured during summer and fall at this location

Microstructural, mechanical and mass transport properties of isotropic and capillary alginate gels

Macroscopically homogeneous and inhomogeneous calcium alginate gels are formed via internal or external addition of various amounts of calcium to an alginate solution. The externally formed gels contain parallel aligned capillary structures. The mechanical and mass transport properties and the microstructure of the differently set gels were characterized by rheological measurements, fluorescence recovery after photobleaching (FRAP) and transmission electron microscopy (TEM). TEM images show a zone of distorted anisotropic gel structure in the vicinity of the capillaries as well as indications of a lower degree of void connectivity. The diffusion rates of dextran at large distances from the capillaries were fast and capillary gels showed a plastic behaviour in comparison to the internally set gels. The results presented show large functional differences between the internally and externally set gels, which cannot be explained by the presence of capillaries alone

Wintertime Arctic Ocean sea water properties and primary marine aerosol concentrations

Sea spray aerosols are an important part of the climate system through their direct and indirect effects. Due to the diminishing sea ice, the Arctic Ocean is one of the most rapidly changing sea spray aerosol source areas. However, the influence of these changes on primary particle production is not known. <br><br> In laboratory experiments we examined the influence of Arctic Ocean water temperature, salinity, and oxygen saturation on primary particle concentration characteristics. Sea water temperature was identified as the most important of these parameters. A strong decrease in sea spray aerosol production with increasing water temperature was observed for water temperatures between −1°C and 9°C. Aerosol number concentrations decreased from at least 1400 cm<sup>−3</sup> to 350 cm<sup>−3</sup>. In general, the aerosol number size distribution exhibited a robust shape with one mode close to dry diameter <i>D</i><sub>p</sub> 0.2 μm with approximately 45% of particles at smaller sizes. Changes in sea water temperature did not result in pronounced change of the shape of the aerosol size distribution, only in the magnitude of the concentrations. Our experiments indicate that changes in aerosol emissions are most likely linked to changes of the physical properties of sea water at low temperatures. The observed strong dependence of sea spray aerosol concentrations on sea water temperature, with a large fraction of the emitted particles in the typical cloud condensation nuclei size range, provide strong arguments for a more careful consideration of this effect in climate models

A pseudo-Lagrangian model study of the size distribution properties over Scandinavia: transport from Aspvreten to Värriö

International audienceThe evolution of the aerosol size distribution during transport between Aspvreten (58.8° N, 17.4° E) and Värriö (67.46° N, 29.35° E) was studied using a pseudo-Lagrangian approach. Aerosol dynamic processes were studied and interpreted utilizing a state-of-the-art aerosol dynamic box model UHMA (University of Helsinki Multicomponent Aerosol model) complemented with OH, NO3, O3 and terpene chemistry. In the model simulations, the growth and formation of aerosol particles was controlled by sulphuric acid, ammonia, water and an unidentified low volatile organic compound. This organic compound was assumed to be a product of terpene oxidation with a yield of 13% in the base case conditions. Changes of aerosol size distribution properties during transport between the stations were examined in twelve clear sky cases. On average, the modelled number agreed fairly well with observations. Mass concentration was overestimated by 10%. Apart from dilution, the only removal mechanism for aerosol mass is dry deposition. A series of sensitivity tests performed revealed that the absolute magnitude of dry deposition effects on the aerosol size distribution is slow overall. Furthermore, nucleation does not leave a significant contribution to aerosol number in the selected cases. The sensitivity of the modelled size distribution to concentration of precursor gases and oxidants is, however, obvious. In order to explain observed mass increase during transport we conclude that a yield of low volatile products from oxidation of terpenes of 10?15% is required to explain observed growth rates. Coagulation is acknowledged to be highly important in modelled cases

Graded Contractions of Affine Kac-Moody Algebras

The method of graded contractions, based on the preservation of the automorphisms of finite order, is applied to the affine Kac-Moody algebras and their representations, to yield a new class of infinite dimensional Lie algebras and representations. After the introduction of the horizontal and vertical gradings, and the algorithm to find the horizontal toroidal gradings, I discuss some general properties of the graded contractions, and compare them with the In\"on\"u-Wigner contractions. The example of $\hat A_2$ is discussed in detail.Comment: 23 pages, Ams-Te

Ferromagnetic Domain Distribution in Thin Films During Magnetization Reversal

We have shown that polarized neutron reflectometry can determine in a model-free way not only the mean magnetization of a ferromagnetic thin film at any point of a hysteresis cycle, but also the mean square dispersion of the magnetization vectors of its lateral domains. This technique is applied to elucidate the mechanism of the magnetization reversal of an exchange-biased Co/CoO bilayer. The reversal process above the blocking temperature is governed by uniaxial domain switching, while below the blocking temperature the reversal of magnetization for the trained sample takes place with substantial domain rotation

Nitrate dry deposition in Svalbard

This is the final version of the article. Available from Taylor & Francis via the DOI in this record.Arctic regions are generally nutrient limited, receiving an extensive part of their bio-available nitrogen from the deposition of atmospheric reactive nitrogen. Reactive nitrogen oxides, as nitric acid (HNO3) and nitrate aerosols (p-NO3), can either be washed out from the atmosphere by precipitation or dry deposited, dissolving to nitrate (). During winter, is accumulated in the snowpack and released as a pulse during spring melt. Quantification of deposition is essential to assess impacts on Arctic terrestrial ecology and for ice core interpretations. However, the individual importance of wet and dry deposition is poorly quantified in the high Arctic regions where in-situ measurements are demanding. In this study, three different methods are employed to quantify dry deposition around the atmospheric and ecosystem monitoring site, Ny-Ålesund, Svalbard, for the winter season (September 2009 to May 2010): (1) A snow tray sampling approach indicates a dry deposition of –10.27±3.84 mg m−2 (± S.E.); (2) A glacial sampling approach yielded somewhat higher values –30.68±12.00 mg m−2; and (3) Dry deposition was also modelled for HNO3 and p-NO3 using atmospheric concentrations and stability observations, resulting in a total combined nitrate dry deposition of –10.76±1.26 mg m−2. The model indicates that deposition primarily occurs via HNO3 with only a minor contribution by p-NO3. Modelled median deposition velocities largely explain this difference: 0.63 cm s−1 for HNO3 while p-NO3 was 0.0025 and 0.16 cm s−1 for particle sizes 0.7 and 7 µm, respectively. Overall, the three methods are within two standard errors agreement, attributing an average 14% (total range of 2–44%) of the total nitrate deposition to dry deposition. Dry deposition events were identified in association with elevated atmospheric concentrations, corroborating recent studies that identified episodes of rapid pollution transport and deposition to the Arctic.As a part of the international project ‘Sources, sinks and impacts of atmospheric nitrogen deposition in the Arctic’ (NSINK), this project received financial support from an EU Marie Curie Initial Stage Training Network Award NSINK (FP7 215503) and fieldwork were supported by an Arctic Field Grant, Svalbard Science Forum. NILU's atmospheric monitoring program at the Zeppelin Station is financed by the Norwegian Climate and Pollution Agency and ITM's research at the same station is supported by the Swedish Environmental Protection Agency. This is also a contribution to ‘Crysophere-Atmosphere interaction in a changing Arctic climate (CRAICC)’ a Top-Level Research Initiative (TRI). Logistic support was provided by the Norwegian Polar Institute staff at the Sverdrup Station, Ny-Ålesund, while A. Nowak-Zwierz, K. A. Kozio and C. L. Chakrabarti contributed to the analytical work in Sheffield, and J. Kohler kindly provided snow accumulation data from Austre Brøggerbreen

One year boundary layer aerosol size distribution data from five nordic background stations

International audienceSize distribution measurements performed at five different stations have been investigated during a one-year period between 01 June 2000 and 31 May 2001 with focus on diurnal, seasonal and geographical differences of size distribution properties. The stations involved cover a large geographical area ranging from the Finnish Lapland (67º N) down to southern Sweden (56º N) in the order Värriö, Pallas, Hyytiälä, Aspvreten and Vavihill. The shape of the size distribution is typically bimodal during winter with a larger fraction of accumulation mode particles compared to the other seasons. Highest Aitken mode concentration is found during summer and spring during the year of study. The maximum of nucleation events occur during the spring months at all stations. Nucleation events occur during other months as well, although not as frequently. Large differences were found between different categories of stations. Northerly located stations such as Pallas and Värriö presented well-separated Aitken and accumulation modes, while the two modes often overlap significantly at the two southernmost stations Vavihill and Aspvreten. A method to cluster trajectories was used to analyse the impact of long-range transport on the observed aerosol properties. Clusters of trajectories arriving from the continent were clearly associated with size distributions shifted towards the accumulation mode. This feature was more pronounced the further south the station was located. Marine- or Arctic-type clusters were associated with large variability in the nuclei size ranges. A quasi-lagrangian approach was used to investigate transport related changes in the aerosol properties. Typically, an increase in especially Aitken mode concentrations was observed when advection from the north occurs, i.e. allowing more continental influence on the aerosol when comparing the different measurement sites. When trajectory clusters arrive to the stations from SW, a gradual decrease in number concentration is experienced in all modes as latitude of measurement site increases